DOSAGE RATE

From Family car to Work Ute. From Campervan to Furniture Van.

From 4WD to Prime Mover. From Printing Press to Sugar Mill

What is the mix ratio for SMT2?

The mix ratio varies depending on the fluid into which SMT2 is mixed and the load requirements. 

Basically, SMT2 is mixed in as low as 0.01% in fuels to a high of 12% for grease or lubricants in heavy load environments. Beyond 12%, no appreciable benefit is achieved.

Engine oil for Petrol, LPG and Diesel engines:

• Initial treatment                                                            add 7% to 10% 

• Each 7 to 10,000-kilometre oil change and thereafter       add half the original dosage   

Lubricants for manual gearboxes, standard differentials, and hubs: add 7% to 10%

Fluids for automatic transmission, power steering, and rack and pinion and hydraulic fluids:      2.5% and 1.25% on oil change

Petrol, diesel, and LPG fuel: add at ratio of 1 part SMT2 to 1,000 parts of fuel

Boundary greases and lubricants for heavy loads (mining, paper mills, commercial marine, oil exploration, railroads):  Add up to 10%

Two Stroke Engine Fuel (Premix): the percentage added to this two stroke fuel is 1 part SMT2 to 1,000 parts of fuel

WARNING:

Do not use SMT2 in any wet brake or wet clutch application